The hull is finalised and the forms are cut from the building jig and re-inserted.
Stripping og the front deck is ongoing. I have sorted the strips by the colours and layed them light dark in turn.
Front deck almost finished. It takes more time as I do not use stables here in order to avoid the marks.
Could not resist it despite my ambitions for a quick&dirty project. I cut the deck for laying in stripes.
The deck cut in four
pieces.
Dart stripes in mahogny being glued.
The hard intermediate piece between the front and aft deck where the strips really twists.
December 2010
Front deck finished.
December 2010
The transition piece between front and aft deck almost done.
Aft deck done.
December 2010
The front deck with inlay ground.
December 2010
Transition from front to aft deck done. I had to put in a couple of wedges to make it smooth.
Front deck being primed with epoxy. I use a rubber
squeegee to minimize the amount of epoxy.
January 2011
Front deck with glassfibre. Now all the excess woven needs to be trimmed.